İndirme & Ağ

Dosya'larınızın varsayılan indirme klasörüdür..
Varsayılan indirme klasörünüzü sonradan değişitirmek , daha evvelden eklenmiş linkleri etkilemez. If you like to change the download destination of links in the downloadlist, use the Downloadlionk Contextmenu

default:disabled
If checked, for each package, JD creates a subfolder in the downloaddirectory.

default: at startup
After downloads have finished, the get marked green. You can config what to do after downloads finished.

1. Hemen kaldırır
2. uygulamayı tekrar başlatığınızda kaldırır
3. Paket tamamen tamamlandığı vakit kaldırır
4. otomatik kaldırmaz

Aynı isme sahip olan dosya ile ilgili ne yapmak istediğinize karar verbeilirsiniz. Seçenekleriniz:

1. Linki atlar ve devre dışı bırakır (Gri renkte işaretler) (varsayılan)
2. var olan dosyanın üzerine yazar

default: 100 sec Downloadtimeout. Some Hosters are on busy days realy slow. That's why this vaklue should not be to low.

Downloadtimeout. Some Hosters are on busy days realy slow. That's why this vaklue should not be to low.

default: 5 min If your internet connection breaks down, JD waits this time before it starts a new attemp to connect.

Read about Proxy server on wikipedia.
JD comes with proxy support. Enable this option if you want to use a proxy.
JD is not yet able to use proxy lists to avoid waittimes. The proxy feature is only for internet connections that do not work without proxies.

Host or Ip of your proxy server

Port of your Proxy(e.g. 1080,8080,80,…)

If your proxy requires authorization, enter your username here. Leave blank if not.

If your proxy requires authorization, enter your password here. Leave blank if not.

JD is able to start and run more than one download at a time. Parallel downloads may boost your total downloadspeed.

You can restrict the amount of parallel downloads for one host. This may be usefull if you want to download a package from different mirrors/hosts.

Another way to boost your downloadspeed is Chunkload. JD opens multiple connections for one file. Most hosters only support this feature in premium mode

Sometimes, a download fails due to temporary serverproblems. In this case JD retries the download after a certain waittime. You can set a limit for retries here. After the limit is reached, JD skips the link and downloads the next ones.

If you are downloading from multiple mirrors, it may occure that one of them requests an ipchange (reconnect) while the other one is still downloading. If the other link is resumable, JD is able to stop it, perform a reconnect an resume it afterwards. This feature may speed up your total downloadspeed.

JD uses the IP check to verify a reconnect. If you turn of the ip check, JD accepts every reconnect try as successfull. The user has to take care, that the new connection is estabilished wehen the reconnect process returns.

JD can use any site to check it's external ip. You even may want to use your own ipcheck script.

JD needs a regular expression to find the ip on the given IP-Check site.

A regular expression which defines valid ips. Change this regex if you want JD only to download with special IP ranges.

Sometimes the IP may changes without reconnecting. For example the 24h disconnect of your ISP. Even if you did not config your reconnect settings, JD will check every *** minutes if you got a new ip.

More and more hosters provide hashvalues which are unambiguous for a certain file. By comparing this hashvalues JD can verify if Checksum errors occured. Somtimes the CRC values of a whole package are given ba a *.sfv file. JD will download this sfv file if available and use it to check your downloads.

If this option is checked, JD caches all loaded data, writes it in an extra buffer and writes it in a separate process to harddisk. As result, JD needs a bit more RAM, but downloads may be faster.
This feature is experimental. IT only may take effect on systems with damaged harddiscs, networkdisc or slow external harddisks.

For veryvery fast connections(1 GBit or faster) it may be usefull to increase the buffersize.